通用banner
Your current location : Home >> News >> Technical Information

How to maintain the construction equipment of electric power engineering?

2020-12-28 00:00:00
second

With the increasing influence of power system on life, more and more industries choose reliable power engineering construction equipment as the need of long-term development. In order to ensure the high concentration of power system operation state, the cleaning, anti-corrosion and management of equipment state is essential. So, how to maintain the power engineering construction equipment and extend its vitality?

1、 Pay attention to the cleaning method and remove the hidden danger of the equipment in time

Because most of the power engineering construction equipment is installed in the outdoor, based on this basis, in the daily maintenance and maintenance, increasing the intensity of equipment cleaning has become a necessary condition. In order to clean the operation equipment in electric power construction, reasonable and appropriate chemical reagents must be used according to the specific technical requirements and special precautions of the equipment. During the cleaning period, using chemical reagents to clean the equipment can not only produce good chemical reaction with the equipment, but also obtain unexpected cleaning effect from the shortened time.

2、 Using anticorrosion strategy to prolong the service time of equipment

In the process of daily maintenance of power equipment, anti-corrosion also has an important influence on the service life of power engineering construction equipment. The specific operation steps are as follows: for the exposed conductor joints, the power compound grease can be directly applied for anti-corrosion to avoid oxidation of joints and ensure the effectiveness of joint reuse.

3、 Formulate emergency plan and strengthen daily management

Electric power enterprises have a general understanding of the actual operation of the equipment. In order to better evaluate the hidden dangers or possible faults of the equipment, they should make targeted emergency plans in advance to avoid adverse effects and losses. At the same time, clearly mark the injection line, provide great convenience for the troubleshooting of wire faults, and promote the improvement of work efficiency in the process of power engineering construction.


label

Website of this article:http://en.lnhxjs.cn/news/445.html

Home  |  About  |  Product   |  Cases  |  Honor  |  Video  |  News  |  Job | Contact